Voyager S3 Dock SATA

NWTU3S3HD

Nuevo

La manera más fácil de acceder a sus datos en discos SATA 2.5 y 3.5, ideal para editores de video, fotógrafos

Características:

  • Interface USB 3.0 - 2.0
  • Soporta Discos 2.5" and 3.5" SATA I/II/III y SSD drives hasta 6.0TB
  • Tasa de transmisión de datos up to 5.0Gb/s (500MB/s)
  • Botón PUSH para expulsar unidad
  • Hot-Swap función para rápido accesos a varios discos SATA
  • PLUG and PLAY para MAC y PC

Más detalles

1 Artículo

disponible

$120.00

Más información

Link del fabricante

La solución NewerTech Voyager SATA Drive Docking soporta discos de 2.5" & 3.5" SATA 6Gb/s, 3Gb/s & 1.5Gb/s up to 6.0TB.
Arranque o Cambio de Disco a su Voluntad

Whether you're on a data recovery mission or just want to check the contents of an older swapped out drive, NewerTech Voyager is the easiest, most convenient way to access data from any Serial ATA (SATA) drive. Just insert any standard 2.5" or 3.5" SATA I/II/III drive with up to 6.0TB capacity into the compact docking base and select one of the four interfaces supported by your Mac® or PC for the fastest data transfer performance. Then, start reading and/or writing data to the docked drive. There's nothing else to install or configure!

Ahorre tiempo y Dinero

With its Plug and Play design, the NewerTech Voyager saves you the time of installing a drive into a computer or the cost of an external enclosure. Now you can think of bare SATA drives with the same convenience and instant access benefits as flash memory cards…but with huge gains in storage capacity!

Listo para cambio en caliente
Have multiple drives you need to access? No problem, NewerTech Voyager's unique design makes hot-swapping SATA drives a breeze*. When finished using your drive, simply pull up on it or use the eject lever for 3.5" drives for quick and effortless removal.
Ideal Solution for Photographers and Videographers

Instead of needing multiple enclosures and power supplies for every archived drive, NewerTech Voyager makes accessing your valuable data a breeze. Just slide in your drive, find the desired image or clip, and then return the drive to your storage safe.

Plug and Play
With all supported interface connector cables included, an auto-switching power supply for worldwide compatibility, and flexible operating system compatibility, the NewerTech Voyager can travel your data universe with ease.
*Use of eSATA interface requires system reboot in order to recognize drive. For FireWire 800 users, OWC recommends that the Voyager be the only device connected or the last device in the chain when hot-swapping drives. If you have other devices behind the Voyager, not all devices will remount after a drive is swapped. When that occurs, a power-cycle is needed for that device. For eSATA users, a system reboot is required in order to recognize drive.

Reseñas

No hay reseñas de clientes en este momento.

Escriba una reseña

Voyager S3 Dock SATA

Voyager S3 Dock SATA

La manera más fácil de acceder a sus datos en discos SATA 2.5 y 3.5, ideal para editores de video, fotógrafos

Características:

  • Interface USB 3.0 - 2.0
  • Soporta Discos 2.5" and 3.5" SATA I/II/III y SSD drives hasta 6.0TB
  • Tasa de transmisión de datos up to 5.0Gb/s (500MB/s)
  • Botón PUSH para expulsar unidad
  • Hot-Swap función para rápido accesos a varios discos SATA
  • PLUG and PLAY para MAC y PC

Accesorios